What we build
Five disciplines,
one scope.
Solar generation, battery storage, in-Kingdom steel, electrical interfaces and the service that follows. Everything below is delivered under one contract, by one party.
01 · Solar generation
Utility and C&I.
Ground mount and rooftop PV, designed against the site’s real load profile rather than a generic yield number. We size the array from consumption and irradiance, model the annual output, then build the mounting structure, the DC and AC side, and the protection around it.
Utility-scale
Ground-mount arrays with fixed or seasonal tilt, string architecture chosen for the site’s shading and cable runs.
Commercial & industrial
Rooftop, carport and ground arrays sized to the facility’s daytime demand.
Agricultural
Solar pumping and irrigation control for wells, farms and water systems.
02 · Battery energy storage
The storage block, sized to the duty cycle.
HAAK sizes the battery from the site’s dark-hour energy and its load shape — not from a catalogue. That means a capacity based on what the site actually needs to carry through the night or the outage, a thermal design built for 50 °C and daily cycling, and LV/HV integration into the existing distribution rather than a box dropped next to it.
Cells, packs, battery management and controls come from BLUETTI. HAAK does the sizing, the integration, the protection and the in-Kingdom service — including faults.
| Application | What the storage does |
|---|---|
| Solar shifting | Moves midday generation into the evening peak instead of exporting it |
| Peak shaving | Discharges at peak to hold the site’s maximum demand below a threshold — the client owns the asset and the savings |
| Diesel optimisation | Carries base load so generators run in their efficient band, or stay off |
| Backup | Holds critical loads through outages and grid interruptions |
| Solar farms | Smooths and shifts output at the point of connection |
BLUETTI figures as published by BLUETTI (bluettipower.com), 2026. BLUETTI supplies cell, pack and controls; HAAK is the single point of responsibility to the client.
03 · Steel structures
Built in Al-Qassim.
Mounting structures are the longest-lead, highest-corrosion item on a Saudi project. Ours are fabricated in-Kingdom by PSS at Riyadh Al-Khabra, in Al-Qassim, from galvanised steel, Magnelis, aluminium and hot-rolled sections — C-channels, rails, carports and custom frames cut to drawing.
Because the factory is a road journey away rather than a sea freight booking, a site change is a re-cut rather than a re-order, and the batch records stay in the country.
Indicative comparison, not a quotation of any third-party offer. Imported lead time shown as 8–14 weeks including freight and clearance.
04 · Electrical interfaces
Panels, protection and the parts that join it up.
Between the array, the battery and the building there is a set of interfaces that decide whether the plant behaves: LV and MV panels, protection settings, metering, cabling and changeover logic. HAAK designs and assembles those panels and defines the protection, so the boundary between systems is drawn by the same party that built both sides of it.
Panels
Design, assembly and protection for distribution, changeover and battery interfaces.
Commissioning
Documented tests, protection verification, witnessed first operation and handover.
05 · Monitoring, SCADA and O&M
After switch-on.
A plant is handed over once, and then runs for twenty years. HAAK commissions the monitoring and data acquisition, reports on production and faults remotely, and carries out preventive and corrective service — with the SLA stated in the commercial offer for each project.
| Service | What it covers |
|---|---|
| SCADA | Monitoring, data acquisition, remote reporting |
| O&M | Preventive and corrective service, fault diagnosis |
| Reporting | Production and performance reporting on the installed plant |
| Training | Qualification of the client’s own operations team |
06 · Where it applies
Segments we build for.
Utility-scale solar
Ground mount at MW scale, with or without co-located storage.
Industrial facilities
Factories, plants and warehouses with daytime load and demand charges.
Hospitals & hotels
Continuous load, outage exposure, and a need for quiet backup.
Telecom / BTS sites
Off-grid and weak-grid sites where diesel is the current answer.
Construction
Temporary power for sites that will not see a grid connection for years.
Diesel-heavy sites
Retrofit of solar and storage around existing generators — delivered as EPC.
Solar farms
Storage co-located at the point of connection to shift and smooth output.
Street lighting
Solar street lighting for roads, compounds and industrial estates.
Agricultural
Pumping, irrigation control and remote water systems.
Next step
Tell us the load.
Send the site location, the consumption profile and the connection you have. We will come back with the engineering and a savings case.
HAAK Energy Solutions Co.
CR 7041633988
Riyadh, Kingdom of Saudi Arabia
Part of Alchemist Energy Group
What we deliver
Solar generation · utility and C&I
Battery storage · design and integration
Steel structures · in-Kingdom fabrication
EPC and O&M · lifecycle
Integrated renewable energy · BESS · steel · EPC