HAAK Energy Solutions Co. · CR 7041633988 · Riyadh
Solar, storage and steel.
Under one contract.
Engineering, in-Kingdom fabrication and EPC crews inside one platform, with energy storage and controls from BLUETTI. HAAK Energy is part of Alchemist Energy Group, established more than fourteen years ago.
Most energy projects do not fail inside a discipline. They fail at the seams between them — where the PV contractor hands over to the battery supplier, where the steel arrives after the civil works are finished, where the party that designed the system is no longer the party answering the phone. HAAK is built to remove those seams: one scope, one programme, one party answerable from site survey to service.
01 · The business
An integrator, not a supplier with a subcontractor list.
HAAK designs, integrates and installs renewable energy systems — solar generation, battery storage, electrical panels, metal structures and the service that follows commissioning. The engineering office, the fabrication and the crews sit inside the same platform, which is why the scope closes without gaps for the client to arbitrate.
What we take on
Site audit and load profile, electrical and structural design, yield simulation, BOQ and feasibility — then supply, civils, structures, installation, testing and commissioning. After handover, preventive service, monitoring and fault response.
What that changes for the client
One purchase order instead of five. One programme that already includes fabrication, so lead time is planned rather than discovered. One party answerable when something needs to be put right.
02 · The delivery platform
Engineering, metal, execution.
Six pillars under one contract. Each one is a discipline that would otherwise be a separate supplier, a separate warranty and a separate conversation.
03 · In-Kingdom fabrication
Made in Al-Qassim.
Structures carry the longest lead time and the highest corrosion risk in a Saudi project. Ours are fabricated in-Kingdom by PSS at Riyadh Al-Khabra, Al-Qassim, with a showroom in Buraidah — galvanised steel, Magnelis, aluminium and hot-rolled sections, cut to the site sequence rather than to a container manifest.
| Material | Why it is used |
|---|---|
| Galvanised steel | High corrosion protection in desert conditions |
| Magnelis (Zn-Al-Mg) | Advanced coating, durable and cost-effective |
| Aluminium | Lightweight, corrosion-resistant, recyclable |
| Hot-rolled steel | High load capacity for carports and frames |
| What changes | Imported package | In-Kingdom fabrication |
|---|---|---|
| Lead time | 8–14 weeks with freight and clearance | Programmed to the site sequence |
| Freight exposure | Rates, port delay, transit damage | Road delivery from Al-Qassim |
| Site changes | Re-order, re-ship, re-wait | Re-cut and re-coat in-house |
| Traceability | Mill certificates arrive late | Batch records held locally |
Indicative comparison of delivery models, not a quotation of any third-party offer.
04 · Storage & control
The battery and the brain.
HAAK sizes, integrates and services the storage block. Cells, packs and the controls that run them come from BLUETTI — thirteen years of storage engineering, 847 patents and a 130,000 m² manufacturing base, with 22 service stations across 120+ countries. Packs are LiFePO4 from BLUETTI’s own plant; the BMS and the electronics are theirs too.
What BLUETTI supplies
Cells and packs, the battery management system, modular ESS stacked on site, hybrid inverters for PV, battery and grid, plus energy management and remote diagnostics.
What HAAK does with it
Sizes capacity from the site’s dark-hour energy rather than a datasheet. Designs for 50 °C and daily cycling. Integrates it with the PV, the panels and the site load — then services it in-Kingdom, including faults.
BLUETTI figures as published by BLUETTI (bluettipower.com), 2026. BLUETTI supplies cell, pack and controls; HAAK is the single point of responsibility to the client.
05 · Track record
Proven at scale.
The executed portfolio behind the contract — plants built and designed by the group across Al-Jouf, Al-Qassim and Hail.
| Project | Location / segment | Scale |
|---|---|---|
| Safwa Al-Jouf | Al-Jouf · utility-scale | 6,341.76 kWp |
| Kuwaiti Waqf | Al-Qassim · institutional | 1,525.2 kWp |
| Selected regional portfolio | Qassim · Al-Jouf · Hail | 12 MWp total |
| Executed solar, cumulative | Kingdom-wide | 21.5+ MWp |
Plants under management
30+ MW under O&M — remote monitoring, fault diagnosis and performance reporting on sites already handed over.
Designed for clients
200+ MW designed — electrical and structural packages, yield simulation and BOQs produced for other parties’ projects.
Site photography supplied by Perfect Solar System. Capacities as reported by PSS; client names and handover certificates are issued per project.
06 · Scope & supply chain
One scope, no gaps.
Eight service lines under a single contract — nothing carved out and handed back to the client.
| Service | Scope |
|---|---|
| EPC | Design, supply, installation, commissioning, handover |
| Engineering | Electrical and structural design, load study, BOQ |
| Steel structures | Design, manufacture and supply of mounting systems |
| Systems supply | Modules, inverters, batteries, protection, cables |
| Testing & commissioning | Tests, compliance, first operation, handover |
| O&M | Preventive and corrective service, monitoring |
| SCADA | Monitoring, data acquisition, remote reporting |
| Training | Qualification of the client’s own teams |
Brands we specify
Modules — LONGi · Jinko Solar · JA Solar · Astronergy · AIKO
Inverters & pumping — GoodWe · VEICHI · INVT · ROYAL · MULTIFIT · NPP
Brands specified by HAAK and supplied through the platform; manufacturer authorisation letters issued per project.
07 · How we deliver
From survey to switch-on.
One contract covers the whole system. HAAK owns the integration risk, so the client deals with one party.
| Phase | What happens | Output |
|---|---|---|
| 01 | Site audit, load profile, solar resource, grid and diesel baseline | Feasibility |
| 02 | Sizing of PV, BESS and control; yield simulation; savings case | Engineered design |
| 03 | Supply, civils, structures, installation, commissioning | Commissioned plant |
| 04 | Monitoring, dispatch strategy, preventive service | Performance reporting |
08 · Commercial model & commitments
Delivered and answerable.
HAAK works on EPC — design and build, new plant or retrofit. The client owns the asset and the savings. What follows is what we sign for; scope and limits are set per project in the commercial offer.
| Commitment | What it means |
|---|---|
| Single point of responsibility | One party answerable for design, supply, build and service |
| Design basis | Yield modelled before award; commissioning against the design |
| Testing and commissioning | Documented tests, compliance, witnessed handover |
| Warranty and defects | Position stated in the commercial offer, per project |
| Operation and maintenance | Preventive service and fault response; SLA stated in the commercial offer, per project |
| Local presence | In-Kingdom fabrication, crews and service support |
Next step
Start with a site survey and a savings case.
Sized, priced and delivered by one accountable party. Send us the site and the load profile, and we will come back with the engineering.
HAAK Energy Solutions Co.
CR 7041633988
Riyadh, Kingdom of Saudi Arabia
Part of Alchemist Energy Group
What we deliver
Solar generation · utility and C&I
Battery storage · design and integration
Steel structures · in-Kingdom fabrication
EPC and O&M · lifecycle
Integrated renewable energy · BESS · steel · EPC